Introduction of riveting technology of industrial casters
The actual installation and application
of industrial casters will involve riveting steps. The quality of
riveting technology is related to
the safe use of subsequent casters. Therefore, Hanke casters will
introduce in detail what is
the riveting technology of industrial casters.
1. The industrial caster riveting method makes
the deformation of the rivet follow the natural flow of the metal,
does not reduce the notch
impact toughness and ductility of the material, reduces the risk of
excessive tangential
tensile stress around the rivet pier head, and the material has no
broken fibers after riveting
flow, which can improve the bearing capacity of the rivet. After
the destructive test of swing
cold-rolled caster riveting and traditional hammering and stamping
caster riveting specimens, it is
known that the connection strength produced by cold-rolled caster
riveting is about 80% higher than
that of traditional caster riveting. After the cold-rolled caster
is riveted, the rivet has almost no
deformation such as bending, bulging and thick pier. At the same
time, the parts connected to
the rivet are not deformed. The above-mentioned defects are more
obvious due to the force
exerting pressure and the impact of riveting with hammering and
stamping casters.
2. The rivet head of the industrial caster riveting method simply
rolls on the rivet without sliding.
The surface roughness of the rivet after forming only depends on
the rivet head, and the surface
roughness of the rivet head is easy to guarantee. Therefore, the
cold-rolled caster riveted rivet has
a smooth and beautiful surface. It is unmatched by other caster
riveting methods.
3. Using the cold-rolled caster riveting method, there is almost no
noise (less than 70db) and no
vibration when the caster is riveted. The noise of the traditional
hammering and stamping caster
riveting method exceeds 90db.
4. The industrial caster riveting machine is easy and safe to
operate. Vicious accidents such as
punching off fingers often occur in punching riveting, and
accidental injury by manual hammer
riveting also occurs from time to time, while grinding riveting is
relatively safe. Although the spindle
rotates, there is a feasible safety cover, and the contact surface
between the rivet head and the
workpiece is small.
5. When using the cold-rolled caster riveting machine, because the
rivet material has particularly
good deformation properties, the riveting rod will not have quality
problems, and the service life is
relatively high. The above is the general situation of industrial
caster riveting technology.
Locking Swivel Casters
| model | KT-LGD-75SB |
| Wheel material | Nylon6 |
| Load Capacity | 670KG |
| Wheel Diameter | 76mm |
| Tread Width | 55mm |
| Load Height | 108MM |
Locking Swivel Casters Describe
Locking Swivel Casters Size
Locking Swivel Casters Material
| Name | Material | Treatment |
| 1 | Caster Seat | Cold-rolled carbon steel | Black Coated/Zn Galvanized |
| 2 | Body | Aluminum alloy | Ivory/Powder Coated |
| 3 | Ball | Bearing Steel | Ni-Cr |
| 4 | Brake | Steel 45 | Zn Galvanized |
| 5 | Pin | Steel 10 | Zn Galvanized |
| 6 | Wheel | PA6 | Black |
Locking Swivel Casters Scope of application
Application.
Communication equipment, semiconductor manufacturing equipment,
experimental equipment,
medical equipment, printing machines, all kinds of Press, all kinds
of special machinery, all kinds
of variable production equipment, dust-free room equipment,
aluminum frame, equipment, etc.
About us.
KTC (Bejing Korea Technology Caster Co., Ltd.) was founded in 2007.
KTC is a modern
company specialzingin the production of multi function &high
quality CASTER and
KT FOOT based on best design and design technology.
KTC.
The company is headquartered in Niulanshan Industrial Zone,Shunyi
District, Beijing. KTC
adopts international advanced production testing equipments,
professional intelligent
production management system and professional design flow. Now the
company produces
multi function & high quality production, such as KT CASTER and KT
FOOT, among which
high quality of height adjusting CASTER,shockproof type CASTER,
high quality of height
adjusting CASTER, shockproof type CASTER,high load CASTER and level
adjusting FOOT
are widely used in the world's advanced automation equipment and
semiconductor e
quipment industry.
In order to manufacture the world's highest level of products,KTC
use the best processing
technology and equipment. And KTC continuously launches world top
level of new products.
KTC's s also has set up a branch in Korea, so it is favored by
theusers of various fields around
the world.
