2 ton heavy duty load caster swivel flange wheels Construction works

Castor PA material nylon 6 and nylon 66 structure
Nylon 6 is polycaprolactam, while nylon 66 is polycaprolactam adipate. Nylon 66 is 12% harder than

nylon 6. Theoretically, the higher the hardness of nylon, the greater the brittleness of the fiber, and

the easier it is to break. The melting point and the melting point of elastic nylon 6 are 2200c and that

of nylon 66 is 2600C. The lower melting point makes nylon 6 have better resilience, fatigue resistance

and thermal stability than nylon 66. Color fastness is not a characteristic of nylon. It is the dye in nylon

rather than nylon itself that fades under light.

Properties of wear resistance and dust resistance nylon because nylon has many characteristics, it is

widely used in automobile, electrical equipment, mechanical parts, transportation equipment, textile,

paper machinery and so on. With the miniaturization of automobiles, the high-performance of electronic

and electrical equipment and the acceleration of the lightweight process of mechanical equipment, the

demand for nylon will be higher and greater. In particular, nylon, as a structural material, puts forward

high requirements for its strength, heat resistance and cold resistance. The inherent disadvantages of

nylon are also an important factor limiting its application, especially for caster PA 6 and caster PA 6,

which have strong price advantages compared with caster PA 46 and caster Pai 2, although some

properties can not meet the requirements of the development of relevant industries. Therefore, it is

necessary to expand its application field by modifying and improving some of its properties. Due to the

strong polarity of caster PA, it has strong moisture absorption and poor dimensional stability, but it can

be improved by modification. Glass fiber reinforced castor PA adding 30% glass fiber to castor PA, the

mechanical properties, dimensional stability, heat resistance and aging resistance of castor PA are

significantly improved, fatigue resistance, and the strength of nylon is 2.5 times that of unreinforced.

The molding process of glass fiber reinforced castor PA is roughly the same as that without

reinforcement, but because the flow is worse than that before reinforcement, the injection pressure and

injection speed should be appropriately increased, and the barrel temperature should be increased by

10-40 ℃. Because the glass fiber will be oriented along the flow direction in the injection molding

process,resulting in the enhancement of mechanical properties and shrinkage in the orientation direction,

resulting in the deformation and warpage of the product, therefore, in the mold design, the position and

shape of the gate should be reasonable, and the temperature of the mold can be improved in the process.

After the product is taken out, put it into hot water to cool it slowly. In addition, the greater the proportion

of glass fiber added, the greater the wear of the plasticizing elements of the injection molding machine. It

is best to use bimetallic screw and barrel. Flame retardant castor PA due to the addition of flame retardant

in castor PA, most flame retardants are easy to decompose at high temperature, release acidic

substances and have corrosive effect on metals. Therefore, plasticized elements (screw, rubber head,

rubber ring, rubber washer, flange, etc.) need to be plated with hard chromium. In terms of process, try

to control the barrel temperature not too high and the injection speed not too fast, so as to avoid the

discoloration and decline of mechanical properties caused by the decomposition of rubber due to too

high temperature. Transparent caster PA has good tensile strength, impact strength, rigidity, wear

resistance, chemical resistance, surface hardness and other properties, high light transmittance, similar

to optical glass, and the processing temperature is 300-315 ℃, During molding, the barrel temperature

shall be strictly controlled. If the melt temperature is too high, the product will change color due to

degradation,

If the temperature is too low, the transparency of the product will be affected due to poor plasticization.

The mold temperature shall be as low as possible. High mold temperature will reduce the transparency

of products due to crystallization. Temperature resistant caster PA adds carbon black and other UV

absorbing additives to caster PA, which greatly enhances the self-lubricating property and metal wear

of caster PA, and will affect blanking and wear parts during forming processing. Therefore, it is

necessaryto adopt the combination of screw, barrel, rubber head, rubber ring and rubber washer with

strong feeding capacity and high wear resistance. The repeating structure of polyamide molecular

chain is a kind of polymer without amide group. Caster PA has good comprehensive properties,

including mechanical properties, heat resistance, wear resistance, chemical resistance and self

lubrication, low friction coefficient, certain flame retardancy and easy processing. It is suitable for

filling and strengthening modification with glass fiber and other fillers, improving performance and

expanding application range. Nylon-6 plastic products can be prepared by using metal sodium and

sodiumhydroxide as the main catalyst and n-acetylcaprolactam as the cocatalyst to make

8-caprolactam directly through negative ion ring opening polymerization in the model, which is

called cast nylon. This method is convenient for manufacturing large plastic parts.

Polyurethane Swivel Casters Parameter

Polyurethane Swivel Casters Size

Polyurethane Swivel Casters Material

Polyurethane Swivel Casters Scope of application

Application.

About us.

KTC.

The company is headquartered in the Shunyi District Niushan Industrial Zone, Beijing ,The company adopts advanced international production testing equipment and professional intelligent production management system and professional process flow,Current production KT Casters（KT CASTER）,KT Adjusting foot（KT FOOT）High quality products such as multi function,High quality horizontal adjustment of the casters,Shock proof casters,High load casters ,The adjusted feet are widely used in the world's advanced automation equipment and semiconductor equipment and other industries. The company is making the world's highest level of product,Use the most advanced processing technology and equipment,New products emerge in an endless stream.KTC sales network is all over the world,And has set up a company in South Korea,Favored by users from all walks of life around the world